Ir al contenido

En Club HondaSpirit utilizamos cookies propias y de terceros. Lea Política de Privacidad para más información. Para eliminar este mensaje y aceptar el uso, pulse el botón siguiente:    Acepto el uso de cookies

Foto

piña volante URGENTE


  • Por favor identifícate para responder
3 respuestas en este tema

#1 Bullitt_vti

Bullitt_vti

    ARRABASSADA´S TEAM

  • Miembros
  • 1.922 mensajes
  • Gender:Male
  • Location:badalona
  • Coche:EG5+1, OPEL ASTRA 1.6 16V EX: s2000 ap1, 124 rally, 128 sport, panda rally, 127 900, EK4 & BMW 318IS

Escrito 16 diciembre 2011 - 16:44:59

hola a todos, necesito saber la referencia de la piña para adaptar un volante al s2000, si no recuerdo mal también sirve la del algun prelude???, si me decis el vehiculo que es compatible me hariais un favor porque no encuentro en catalogo la ref para s2000 gracias

y si alguien de barcelona o cerca tiene una y la vende voy por ella gracias

#2 pabloludevtec

pabloludevtec

    B18C5 (Integra) 210 hp

  • Miembros
  • 386 mensajes
  • Gender:Male
  • Coche:lude H22A8

Escrito 16 diciembre 2011 - 16:59:35

creo que el volante de s2000 vale para el prelude 5 y creo que también el de integra, pero tampoco te lo puedo confirmar por que no estoy seguro

#3 Storm

Storm

    Asimo Pro

  • Miembros
  • 11.995 mensajes
  • Gender:Male
  • Location:At The Heart Of Winter
  • Coche:2005 Honda S2000

Escrito 16 diciembre 2011 - 17:49:40

hola a todos, necesito saber la referencia de la piña para adaptar un volante al s2000, si no recuerdo mal también sirve la del algun prelude???, si me decis el vehiculo que es compatible me hariais un favor porque no encuentro en catalogo la ref para s2000 gracias
y si alguien de barcelona o cerca tiene una y la vende voy por ella gracias

A ver si ésto ayuda...

http://honda-tech.co...d.php?t=2842882

The List

Please check links and search before you try this. This list only takes into consideration spline counts and column size, but not offset of the wheel itself. It's best to be able to find some people who have already done the swap you're looking into. You could still have clearance issues even if the shaft and socket match up!
Keep in mind some cars have single stage airbags and some cars have dual stage airbags, which means there is one charge for low impact collisions and another for high speed collisions. Using the airbag type not matched to the car could cause your SRS system to not work properly.
ALWAYS CHECK THE LINKS AND SEARCH SO YOU DON'T RUN INTO PROBLEMS OTHERS ALREADY HAVE EXPERIENCED.

The following Hondas use 33 spline:
98-02 Accord
03-07 Accord
08-10 Accord
03-07 Accord Euro R
96-00 Civic (377mm diameter)
01-05 Civic
06-10 Civic
97-01 CRV
96-00 Domani
97-00 EL
01-05 EL
01-08 Fit
09-10 Fit
99-06 HRV
00-06 Insight
97-01 Prelude
99-09 S2000
02-07 RSX
03-07 TSX

The following Hondas use 29 spline:

90-93 Accord (377mm diameter)
94-97 Accord
88-91 Civic
92-95 Civic
92-97 del Sol (371mm diameter)
92-95 Domani
90-93 Integra
94-01 Integra
88-91 Prelude (371mm diameter)
92-96 Prelude


Y un brico:
http://www.s2000.org/mods/hub/

Suerte!

Editado por Storm, 16 diciembre 2011 - 17:50:53.


#4 Bullitt_vti

Bullitt_vti

    ARRABASSADA´S TEAM

  • Miembros
  • 1.922 mensajes
  • Gender:Male
  • Location:badalona
  • Coche:EG5+1, OPEL ASTRA 1.6 16V EX: s2000 ap1, 124 rally, 128 sport, panda rally, 127 900, EK4 & BMW 318IS

Escrito 16 diciembre 2011 - 18:51:14

gracias chikos, lo tomare con calma pk en recambios no me la traen hasta despues de reyes.. y la necesitaba para este domingo (prevision kojonuda por mi parte) jaja lo del airbag me la pela es solo de kita y pon y meto la makina y borro averia asi que nada, gracias




0 usuarios están leyendo este tema

0 miembros, 0 invitados, 0 usuarios anónimos