Muy buenas,
Ayer hicimos ésto:
https://modifry.com/.../top_bypass.htm
Más ésto:
https://www.s2ki.com...e5/#post5882677
Ok guys, I have big news about this thread, because I have done this mod now, and I can tell you that what ruexp67 said about cutting the green/white wire is valid, the BRAKE light in the cluster will still operate normally this way.
When you ground the remaining wire going into the soft top controller, you are telling it that the e-brake is always on, but the rest of the car does not know that when the wire is cut. So there is no need for a switch or anything like that.
To recap, you cut the green/white wire and ground the part going into the soft top controller (there are 2 black ground wires conveniently on the same plug that you can tap it into). The part that is going back into the car, you just let hang, or insulate if you feel necessary. As long as this part is not grounded the BRAKE light will not stay on, yet works as usual with the pulling of the e-brake.
This is a relief to me, because one clicking the e-brake and/or installing a switch was too much for me, I was prepared to lose the functionality of the BRAKE light in the cluster just to have this mod fully work, but am overjoyed that it works with no adverse affects...
Como la seda.
P.D: Todo aquí:
http://viviendoapesa...da-s2000-2.html